Finixa Universal Primer/Filler Aerosol White

Key features

• Universal primer/filler in white, light grey, grey and dark grey suitable to finish with all solvent and water based 1K and 2K paints.

• Can be applied on all surfaces, ideal for fast repairs after sanding too hard. Also ideal for spot or panel repair, especially for smaller surfaces.

• Apply fine layers. If you desire a thick layer: first apply 1 full layer at a distance of 30-35cm and afterwards finish with a crosswise layer at a distance of 20cm.

• All primer/fillers sprays have a special nozzle which sprays a flat vertical pattern, comparable to a spray gun.

• Primer with a high viscosity: shake the can very well before the first use.

Directions for use

1. Clean Surface: Remove any loose paint, rust, or dirt. Surface must be dry and free from oil or grease.
2. Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
3. Test Spray: Perform a test spray on a hidden area to ensure compatibility and color match.
4. Apply Primer: Hold the can 20cm – 30cm (8-12 inches) from the surface and apply 2-3 light coats, allowing 5-10 minutes of drying time between each coat.
5. Dry: Allow at least one hour before applying the topcoat or additional primer for higher build.
6. Nozzle Maintenance: Clear the nozzle by inverting the can and spraying for a few seconds.